Page 9 - ITAtube_Journal01_13
Basic HTML Version
9
ITAtube Journal No1/May 2013
Companies
Regina, Canada - Brandt Engineered
Products Ltd. introduces a new End
Cut-off System to increase seal life
in downstream hydro-testers, and
quickly cut pipe samples.
The End Cut Off is designed to en-
sure quick, accurate parting and
beveling on pipes prior to hy-
dro-testing. lt also provides quick
cut offs in lengths of up to 18”
(457.2 mm) long pipes in order to
prepare various test samples. The
pipe is elevated and loaded into
the end cut off spindle, which parts
and then bevels the pipe at various
feed rates and surface speeds.
Preparing the end of the pipe with
a bevel prior to hydro-testing pro-
longs seal life in the hydro-tester
by removing any unwanted burrs
on the outside of the pipe to avoid
cutting seals as the pipe enters the
test heads. The End Cut-off System
can be setup to bevel the ends of
the pipe or to part off a sample
and then bevel the end of the pipe.
This allows the operator to prepare
various lengths of samples for use
in flat tests, ring hardness tests,
or tensile strength tests improving
process control and meeting manu-
facturing requirements. Damaged
or hooked pipe ends are also re-
moved prior to any further process-
ing.
Brandt’s flexible design increases
productivity, reduces down time
and provides a safe operator expe-
rience.
Brandt Engineered Products Ltd.
specializes in machine and system
design, manufacturing, installa-
tion, and commissioning for the
Tube & Pipe and Mining industries
and has been providing Finishing
Floor Solutions for over 20 years.
For more information please visit
or contact us at
New End Cut-off System
from Brandt
Brandt Engineered Products Ltd.
Box 1876, 302 Mill Street,
Regina, SK, Canada 54P 3E1
Phone 306-791-7557
Fax 306-791-0363
General Specifications
Dimensions (L x W x H) 8ft (2.43 m) x 6ft (1.83 m) x 10ft (3.05 m)
Weight
28,000 lbs (12,727 kg) excluding conveyor
Operation Modes
Semi-automatic I Manual
Product Specification APISCT
Pipe Diameter Range 4-1/2” to 13-3/8” OD (114mm to 340mm)
Pipe Grades
K55,N80,L80,C95,P110,Q125
Pipe Wall Thickness
1;4’’ to %” (6.35mm to 19.05mm)
Feed Rates and Speeds 0.001 “/rev- 0.020”/rev, 200 fpm- 600 fpm
Increasing productivity
